Carbon Fiber Front Fender for the Ducati 748

The Bestem carbon fiber front fender is a direct-fit replacement for the Ducati 748, using the same mounting points as the OEM fender and adding no aftermarket brackets. It also fits the 916, 996, 998, and ST models sharing that front-end architecture, and its UV-resistant clear coat carries a lifetime warranty against sun-ray yellowing.

Does the Bestem front fender fit a Ducati 748?

Yes. The Ducati 748/916/996/998 Carbon Fiber Front Fender (SKU CBDU-996-FFD) is molded to the OEM profile for the 748 and its platform siblings. The bolt holes align with the factory fork-leg mounting locations, so installation uses your existing hardware with no drilling or trimming. The fender clears standard front tire sizes for these bikes without contact under compression.

What is it made of?

The fender is 100% carbon fiber built with a twill weave for the tight, diagonal pattern riders expect on a Ducati. Bestem manufactures these parts in-house rather than reselling, which is why the weave alignment and edge finish stay consistent panel to panel. The result is a light, rigid piece that shaves weight off unsprung and high-mounted mass compared to the painted OEM plastic fender.

Do carbon fiber fenders turn yellow in the sun?

Standard carbon parts often do. Sun-ray (UV) exposure is the most common defect riders report on carbon fiber: the clear coat ambers and clouds over time, dulling the weave. This is exactly where Bestem differs.

Bestem uses a proprietary UV-resistant coating engineered to protect the carbon weave from sun-ray yellowing. It withstands roughly 3,000 hours of UV exposure versus about 1,000 hours for standard OEM carbon clear coat — protecting roughly 3x longer.

Because of that coating, this front fender carries a lifetime warranty against sun-ray (UV) yellowing. On a front fender — a panel that sits high, forward, and directly in the sun — that longevity matters more than on almost any other piece of carbon on the bike.

How do you install it?

Installation is straightforward for most owners:

• Remove the OEM fender bolts at the fork legs and lift off the factory fender.
• Transfer any fasteners or spacers to the Bestem fender.
• Seat the carbon fender against the fork mounts and hand-thread the bolts to confirm alignment.
• Torque evenly to factory spec — do not overtighten against the carbon.

No brackets, adapters, or modifications are required. The pre-molded shape drops into the same position as stock.

Why choose Bestem carbon for a 748?

Bestem has manufactured carbon fiber since 2005 — over 20 years — and supplies OEM carbon parts to car and motorcycle manufacturers. That manufacturing depth is the reason the fitment is tight and the finish holds up. The 748 platform is well past current-production support, so if you want carbon that matches original lines while resisting the yellowing that plagues older aftermarket parts, this is a deliberate upgrade rather than a cosmetic gamble.

Owners often pair the fender with other carbon pieces from the same era, such as the 748/916/996/998 rear hugger and the carbon fiber gauge cover to keep the weave consistent across the bike.

All parts are stocked in Bestem's Atlanta, GA warehouse and ship daily, worldwide, with live phone support every business day if you need to confirm fitment before ordering.