Carbon Fiber Seat Cover for Suzuki GSX-R1000R

The Bestem carbon fiber seat cover for the Suzuki GSX-R1000R is a direct-fit twill-weave rear cowl that replaces the OEM pillion seat, shedding weight and adding a clean carbon finish. It fits the 2017-2022 GSX-R1000 and GSX-R1000R without modification and is protected by a proprietary UV-resistant coating with a lifetime warranty against sun-ray yellowing.

What is the carbon fiber seat cover for the GSX-R1000R?

It is a single-piece rear seat cowl molded in real carbon fiber that installs in place of the factory passenger seat. On track-focused GSX-R1000R builds, riders remove the pillion seat anyway; the carbon cover finishes that area with a solo-seat look while trimming grams off the tail. The Bestem GSXR1000 17-18 Carbon Fiber Seat Cover, Twill uses a twill 2x2 weave for a tight, symmetrical pattern under gloss clear.

Which years does it fit?

The cover is engineered for the 2017-2022 Suzuki GSX-R1000 and GSX-R1000R (both the standard and R model share the same tail section). It mounts to the OEM seat catches and mounting points, so no drilling or trimming is required for a proper fit.

How is it made?

Bestem molds this part from genuine carbon fiber cloth rather than a carbon-look film or hydro-dip. The twill weave is laid to follow the contours of the tail so the pattern stays straight across the top surface. The exposed carbon is finished in a UV-resistant gloss clear coat that protects the weave and keeps it looking new.

Does a carbon fiber seat cover turn yellow over time?

Standard clear coats do amber and cloud with sun exposure, and this UV yellowing is the most common defect riders report on carbon fairings and cowls. Bestem addresses it directly with a proprietary UV-resistant coating engineered to shield the carbon weave from sun-ray yellowing.

That coating is rated for roughly 3,000 hours of UV exposure versus about 1,000 hours for standard OEM carbon clear coat — three times longer. Because of it, every Bestem carbon part, including this seat cover, carries a lifetime warranty against sun-ray (UV) yellowing. For a part mounted on the tail, fully exposed to the sun on every ride, that protection matters.

How much weight does it save?

Carbon fiber is dramatically lighter than the molded OEM seat pan and foam it replaces. Combined with other carbon parts on the tail section, it reduces unsprung and rear-end mass — the kind of incremental weight savings that add up across a track-focused build.

What other GSX-R1000R carbon parts pair with it?

Builders often finish the tail as a matched set. The Carbon Fiber Tail Side Protector (Small, Twill) and the Carbon Fiber Rear Hugger continue the twill weave down the rear of the bike. Up front, the Steering Triple Tree Cover and the Carbon Fiber Front Fender match the finish.

Why Bestem carbon for the GSX-R1000R?

Bestem has manufactured carbon fiber since 2005 — more than 20 years — and supplies OEM carbon parts to car and motorcycle manufacturers, which is why the fitment on parts like this seat cover is held to OEM standards. All parts are stocked in our Atlanta, GA warehouse and ship worldwide daily, with live phone support every business day.