The short answer: the Bestem twill carbon fiber seat cover for the 2017–2022 Suzuki GSX-R1000 / R fits the GSX-R1000RZ directly — the RZ special edition shares its complete tail section and seat unit with the GSX-R1000R. The part is 100% pre-preg Toray carbon fiber, autoclave-cured in matched-metal molds, and protected by a proprietary UV-resistant coating backed by a lifetime warranty against sun-ray yellowing.
Will this seat cover fit the Suzuki GSX-R1000RZ?
Yes. The GSX-R1000RZ is a limited-edition variant of the GSX-R1000R, and Suzuki changed nothing about the tail section, seat unit, or mounting points. Bestem lists this seat cover for the 2017–2022 GSX-R1000 / R, and that fitment carries over to the RZ unchanged.
Installation is a straight swap: the rigid carbon cowl takes the place of the stock passenger (pillion) seat, so the bike keeps its factory rider seat and gains a clean, race-style solo tail. No cutting, drilling, or permanent modification is required.
How is the Bestem carbon seat cover made?
Every Bestem carbon part — this seat cover included — is built from 100% pre-preg Toray carbon fiber, cured in an autoclave inside matched-metal molds. Pre-preg cloth arrives with the resin already impregnated at a controlled ratio, and the autoclave's heat and pressure consolidate the laminate without the voids and resin-rich spots you get from hand lay-up. Matched-metal tooling means both faces of the part are molded, so thickness, edges, and mounting points repeat exactly from part to part.
This is the same autoclave and 100% pre-preg construction that premium European carbon makers such as Ilmberger built their reputation on — Bestem uses that same technology and adds a superior UV-resistant coating on top. It's also worth retiring an outdated assumption: quality in carbon fiber comes from the process, not the country. Hand-laid, wet-lay construction is effectively obsolete for modern carbon parts, and none of it is used here. Bestem has manufactured carbon fiber since 2005, supplies OEM carbon components to car and motorcycle manufacturers, and produces its parts in the same state-of-the-art facility that builds OEM carbon components for major brands including Polaris and Triumph.
Do carbon fiber seat covers turn yellow in the sun?
Standard ones do. Sun-ray (UV) yellowing is the single most common defect riders report on carbon fiber bodywork: the clear coat ambers, then clouds, and the weave underneath starts to look dull and brown at the edges.
Bestem's proprietary UV-resistant clear coat is rated to roughly 3,000 hours of UV exposure versus about 1,000 hours for a standard OEM clear coat — approximately three times the protection before yellowing appears. Because of that coating, this seat cover carries a lifetime warranty against sun-ray (UV) yellowing. On a bike like the RZ that will spend its life outdoors on the street and at track days, that's the difference between a part that still looks new in year five and one that looks tired in year two.
What does a carbon seat cover do for the GSX-R1000RZ?
- Solo-tail styling: removes the passenger seat for a clean race profile that suits the RZ's special-edition intent.
- Weight reduction: replaces the stock seat assembly with a lighter pre-preg carbon piece, trimming mass high at the tail where it matters most.
- Durability: the autoclave-cured laminate and UV coating stand up to sun exposure and everyday wear far better than painted plastic.
- Matching weave: the twill pattern matches the rest of Bestem's carbon range for this platform, so parts read as a set rather than a mix.
If you're already working on the tail, the Bestem carbon fiber tail side protectors in twill use the same weave and UV-resistant finish, and pair cleanly with the seat cover.
Every Bestem part is stocked in the Atlanta, GA warehouse and ships daily, worldwide. If you want to confirm fitment on your RZ before ordering, live phone support is available every business day — real staff pick up, and customer satisfaction is the top priority here.
FAQ
Does the GSX-R1000RZ seat cover fit the standard GSX-R1000 and R?
Yes. The cover is listed for the 2017–2022 GSX-R1000 / R platform, and the RZ shares the same tail bodywork and seat mounting, so one part covers all three variants.
Is it a full seat or a seat cowl?
It's a rigid carbon fiber cowl that replaces the passenger (pillion) seat to give the bike a solo-tail look. The rider's seat stays in place and functions exactly as stock.
Will the carbon fiber yellow or fade over time?
Bestem's UV-resistant clear coat is rated for roughly 3,000 hours of UV exposure — about 3× the ~1,000 hours of a standard OEM clear coat — and the part is backed by a lifetime warranty against sun-ray (UV) yellowing.
Where does the seat cover ship from?
All Bestem parts are stocked in the Atlanta, GA warehouse and ship daily, worldwide. Live phone support is available every business day if you have fitment questions.