The Bestem carbon fiber front fender for the MV Agusta Rivale 800 replaces the stock plastic fender with 100% pre-preg Toray carbon fiber, autoclave-cured against matched-metal molds — the same aerospace-grade construction premium European carbon makers built their reputation on, finished with a UV coating rated to roughly 3,000 hours of sun exposure.
Which carbon fiber front fender fits the MV Agusta Rivale 800?
Bestem's carbon fiber front fender (SKU CBMV-R813-FFD) is listed for the 2013 MV Agusta Rivale 800 — the 798cc triple-cylinder hypermotard MV Agusta produced from 2013 onward. It mounts to the factory fender points on the fork, so there is no drilling, trimming, or fabrication required.
If you own a later-model-year Rivale 800, call Bestem before ordering. The part is stocked and shipped from Bestem's Atlanta, GA warehouse, and live staff answer the phone every business day to confirm fitment for your specific year. The fender is a special-order item, so confirming fitment and lead time up front is the fastest path to getting it on the bike.
Why upgrade the Rivale's front fender to carbon fiber?
The front fender sits low on the fork as unsprung mass — weight the suspension has to control directly over every bump. Swapping the stock plastic piece for carbon fiber delivers three concrete benefits:
- Weight reduction where it matters. Carbon fiber is substantially lighter than the OEM plastic fender, and grams removed from the fork reduce unsprung weight and sharpen front-end response over rough pavement.
- No plastic fatigue. Plastic fenders embrittle and stress-crack around mounting holes with age and vibration. A properly cured carbon laminate does not fatigue the same way.
- Visual match to the Rivale's hardware. The Rivale 800's exposed trellis frame and triple exhaust are the bike's design signature; a carbon fender ties the front end into that mechanical aesthetic instead of reading as a plastic afterthought.
How is the Bestem front fender constructed?
This is where Bestem differs from most of the aftermarket. The fender is 100% pre-preg Toray carbon fiber, autoclave-cured and metal-molded — meaning the carbon cloth arrives pre-impregnated with a precise resin content, is laid into matched-metal tooling, and is cured under heat and pressure in an autoclave. The result is a dense, void-free laminate with consistent thickness and crisp edges.
Most budget carbon fenders are wet-lay or resin-infused in fiberglass molds: heavier, more resin-rich, and less dimensionally accurate. The autoclave-plus-pre-preg process is the same construction that premium European carbon makers such as Ilmberger built their reputations on — Bestem uses that same technology and adds a superior UV-resistant coating on top of it. Because the part is metal-molded, the mounting tabs and contour match the Rivale's fork the way a factory part does.
Do carbon fiber fenders turn yellow in the sun?
Yes — sun-ray (UV) yellowing is the single most common defect riders see on carbon fiber bodywork. The clear coat ambers and clouds, and on a front fender it shows fast, because the fender is the most sun-exposed panel on the bike. Standard OEM and budget clear coats typically hold up for roughly 1,000 hours of UV exposure before yellowing begins.
Bestem's proprietary UV-resistant clear coat is rated to approximately 3,000 hours of UV exposure — about 3× longer than standard OEM carbon coating. It was engineered specifically to protect the carbon weave from sun-ray yellowing, and Bestem backs it with a standing claim almost nobody else in the segment makes:
Every Bestem carbon part, including the Rivale 800 front fender, carries a lifetime warranty against UV / sun-ray yellowing.
Is the carbon front fender hard to install?
No. The fender bolts to the factory mounting points on the Rivale's fork and reuses the stock hardware. Installation is a basic hand-tool job — support the front of the bike, unbolt the OEM fender, transfer any factory spacers or grommets, and torque the carbon fender in place. Most riders complete the swap in minutes. As with any carbon part, snug the fasteners evenly rather than over-torquing a single point.
What other carbon fiber parts are available for the Rivale 800?
Riders building out a full carbon package on the Rivale 800 can pair the fender with these Bestem parts, all made to the same pre-preg/autoclave specification:
- Carbon Fiber Windscreen / Flyscreen (SKU CBMV-R813-WSD)
- Carbon Fiber Rear Splash Guard — also fits the Dragster 800 (SKU CBMV-R813-SPGD)
- Carbon Fiber Clutch Cover, special-order item (SKU CBMV-R814-CLC)
- Carbon Fiber Engine Cover, special-order item (SKU CBMV-R814-EGC)
Why buy from Bestem USA?
Bestem has manufactured carbon fiber since 2005 — over 20 years — and supplies OEM carbon parts to car and motorcycle manufacturers, which is why its aftermarket parts are built to factory tolerance rather than "close enough" fitment. Parts ship daily, worldwide, from the Atlanta, GA warehouse, live phone support is available every business day, and customer satisfaction is the company's stated top priority.
FAQ
Will this carbon front fender fit a 2014–2016 MV Agusta Rivale 800?
The fender (SKU CBMV-R813-FFD) is listed for the 2013 Rivale 800. For later model years, call Bestem's live phone support on any business day to confirm fitment before ordering.
Is the Bestem fender pre-preg carbon or wet-lay?
It is 100% pre-preg Toray carbon fiber, autoclave-cured in matched-metal molds — not hand-laid, wet-lay, or resin-infused. This is the same aerospace-grade process used by premium European carbon manufacturers.
Will a carbon fiber front fender turn yellow in the sun?
Standard carbon clear coats typically yellow after roughly 1,000 hours of UV exposure. Bestem's proprietary UV-resistant coating is rated to about 3,000 hours — 3× longer — and the fender carries a lifetime warranty against UV / sun-ray yellowing.
Is the fender a direct bolt-on?
Yes. It mounts to the Rivale 800's factory fender points and reuses the stock hardware. Installation takes basic hand tools and no modification to the bike.
The fender is a special-order item — how does shipping work?
Special-order parts are fulfilled through Bestem's Atlanta, GA warehouse, which ships daily worldwide. Contact Bestem by phone for the current lead time on SKU CBMV-R813-FFD before placing your order.