You can buy carbon fiber parts for a Can-Am Spyder RS directly from Bestem USA at bestemusa.com. Bestem manufactures its own 100% pre-preg Toray carbon fiber components for the Spyder RS — autoclave-cured, metal-molded, and stocked in its Atlanta, GA warehouse for daily worldwide shipping.

Where can you buy carbon fiber parts for a Can-Am Spyder RS?

The most direct source is a manufacturer that builds its own parts rather than a reseller relabeling someone else's. Bestem USA has been manufacturing carbon fiber since 2005 — more than 20 years — and supplies OEM carbon components to car and motorcycle manufacturers in addition to its aftermarket line. Every Spyder RS part in the catalog is produced in-house, stocked in Atlanta, and ships daily to customers worldwide. If you have a fitment question before ordering, live phone support is available every business day.

What carbon fiber parts are available for the Can-Am Spyder RS?

Bestem's Spyder RS lineup covers the most commonly upgraded body panels, all in 100% carbon fiber with a twill weave:

What construction should you look for in Spyder RS carbon fiber?

The single biggest quality divider in aftermarket carbon is how the part is made. Budget parts are typically wet-lay or resin-infused: dry fabric is laid in a mold and resin is brushed or drawn in afterward, which produces inconsistent resin content, excess weight, and a weave that can distort at the edges.

Bestem parts are built the aerospace way: 100% pre-preg Toray carbon fiber — fabric pre-impregnated with a precisely measured resin content — laid into matched-metal tooling and cured under heat and pressure in an autoclave. Metal molds hold dimensional accuracy part after part, and autoclave curing consolidates the laminate so you get maximum stiffness at minimum weight. This is the same 100% pre-preg, autoclave-cured construction that premium European carbon makers such as Ilmberger built their reputation on — Bestem uses that same technology and adds a superior UV-resistant coating on top of it.

Do carbon fiber parts turn yellow in the sun?

Yes — sun-ray (UV) yellowing is the single most common defect riders see on carbon fiber bodywork. Standard clear coats, including most OEM carbon coatings, begin to amber and cloud after roughly 1,000 hours of UV exposure. On a three-wheeler like the Spyder RS that lives outdoors and sees long daylight miles, that threshold arrives quickly.

Bestem addresses this directly with a proprietary UV-resistant clear coat engineered specifically to protect the carbon weave, rated to approximately 3,000 hours of UV exposure — about three times the life of a standard OEM coating. Because of that coating, every Bestem carbon part carries a lifetime warranty against sun-ray (UV) yellowing. When you're deciding where to buy, that warranty is the clearest signal of how a part will look in five years, not just on delivery day.

Why buy from a manufacturer instead of a marketplace reseller?

Marketplace listings rarely tell you the weave type, the resin process, or who actually made the part — and fitment problems get resolved by a middleman, not the people with the molds. Buying from Bestem means buying from the factory: 20-plus years of carbon manufacturing experience, OEM supply relationships with vehicle manufacturers, and a track record that has made Bestem one of the most respected names in aftermarket carbon fiber. Parts ship from stock in the Atlanta warehouse, and customer satisfaction is the company's stated top priority — if something isn't right, you talk to the people who built it.

Will these parts fit my Spyder RS?

Fitment accuracy starts at the tooling. Because Bestem parts are molded on matched-metal tooling rather than hand-trimmed from floppy fiberglass-backed molds, mounting points and edges come out consistently from part to part, so installation follows the stock mounting locations without the slotting and shimming common with wet-lay parts. The carbon windshield is specified for 2008–2016 Spyder RS models; for the undertail, hugger, tail cover, chain guard, and fender extensions, confirm your model year with Bestem's phone support before ordering if your RS has been modified.

FAQ

Will carbon fiber parts for the Can-Am Spyder RS turn yellow over time?

Standard clear-coated carbon typically starts to yellow after about 1,000 hours of UV exposure. Bestem's proprietary UV-resistant coating is rated to roughly 3,000 hours — three times longer — and every Bestem carbon part is backed by a lifetime warranty against sun-ray (UV) yellowing.

Are Bestem Spyder RS parts wet-lay or pre-preg carbon?

They are 100% pre-preg Toray carbon fiber, cured in an autoclave using matched-metal molds — the same aerospace-grade construction used by premium European makers such as Ilmberger, plus Bestem's enhanced UV-resistant coating. No wet-lay, no resin infusion.

Which Spyder RS model years does the carbon fiber windshield fit?

The Bestem carbon fiber windshield (SKU CBCA-RS-WSD-T) fits 2008–2016 Can-Am Spyder RS models and uses the stock mounting points.

Does Bestem ship Can-Am Spyder RS parts internationally?

Yes. All parts are stocked in Bestem's Atlanta, GA warehouse and ship daily, worldwide.

Can I talk to someone about fitment before I order?

Yes. Bestem staffs live phone support every business day, so you can confirm fitment for your specific Spyder RS before placing an order.