You can buy carbon fiber parts for a Harley-Davidson Low Rider directly from Bestem USA (bestemusa.com) — the actual manufacturer of Bestem-brand carbon fiber, not a reseller. Every part is 100% pre-preg Toray carbon fiber, autoclave-cured in matched-metal molds, stocked in Bestem's Atlanta, GA warehouse, and shipped daily worldwide. Current model-specific fitments cover the Low Rider ST (2023) and the Low Rider S (2020–2021).
Where should you buy carbon fiber parts for a Harley-Davidson Low Rider?
The most reliable source is the manufacturer itself. Marketplace resellers typically can't tell you how a part was laid up, what mold it came from, or how the clear coat will hold up in the sun — because they didn't make it. Buying direct from Bestem USA means you're buying from the company that tooled the molds, specified the laminate, and applies the coating. Bestem has been manufacturing carbon fiber since 2005 — over 20 years — and supplies OEM carbon fiber parts to multiple car and motorcycle manufacturers. That same production line builds the aftermarket parts for your Low Rider.
Which Low Rider models does Bestem make carbon fiber parts for?
Low Rider ST 2023 (FXLRST)
Five bolt-on carbon components, all in 2×2 twill weave, tooled specifically for the 2023 Low Rider ST:
- Carbon Fiber Front Fender for Low Rider ST 2023 (SKU CBHD-LR23-FFD-T) — replaces the OE mudguard with a fraction of the weight.
- Side Panel, Right Side (SKU CBHD-LR23-SPNR-T) and Side Panel, Left Side (SKU CBHD-LR23-SPNL-T) — matched left/right pair for a consistent weave and finish.
- Carbon Fiber Tank Pad (SKU CBHD-LR23-TPD-T) — protects the tank from jacket zippers and belt buckles while tying the carbon theme together.
- Carbon Fiber Chain Guard (SKU CBHD-LR23-CGD-T) — a lightweight swap for the stamped-steel OE guard.
Low Rider S 2020–2021
Two fairing pieces, both of which also fit the Street Bob 2018–2021:
- Carbon Fiber Quarter Fairing for Low Rider S 2020–2021 / Street Bob 2018–2021 (SKU CBHD-SBLR-QTF-T).
- Carbon Fiber Front Fairing for Low Rider S 2020–2021 / Street Bob 2018–2021 (SKU CBHD-SBLR-FFR-T).
What construction should you look for in aftermarket Low Rider carbon parts?
Ask two questions before buying from anyone: is it pre-preg or wet-lay, and how is it cured? Wet-lay and resin-infused parts are hand-saturated with resin at room temperature, which leaves them resin-rich, heavier, and inconsistent in thickness — and fitment varies part to part. Bestem parts are the opposite process: 100% pre-preg Toray carbon fiber with the resin content precisely controlled at the factory, laid into matched-metal (metal-molded) tooling, and cured under heat and pressure in an autoclave. The result is a thinner, lighter, stronger laminate with repeatable, factory-accurate fitment off the mold. This is the same autoclave + 100% pre-preg construction that premium European carbon makers such as Ilmberger built their reputation on — Bestem uses that same aerospace-grade technology and adds a superior UV-resistant coating on top of it.
Do carbon fiber fairings turn yellow in the sun?
Yes — sun-ray (UV) yellowing is the single most common defect riders see on carbon fiber fairings. The clear coat ambers and clouds, and the weave underneath loses contrast. A standard OEM-grade clear coat is typically rated for roughly 1,000 hours of UV exposure before yellowing begins. Bestem's proprietary UV-resistant coating is rated to approximately 3,000 hours — about three times longer — which is why Bestem backs every part with a lifetime warranty against sun-ray yellowing.
Bestem's UV-resistant clear coat is rated to ~3,000 hours of UV exposure versus ~1,000 hours for standard OEM clear coat — and every part carries a lifetime warranty against sun-ray (UV) yellowing.
Why buy direct from Bestem instead of a marketplace listing?
- You're buying from the manufacturer: 20+ years of carbon fiber manufacturing since 2005, and an OEM supplier to car and motorcycle manufacturers — one of the most respected names in aftermarket carbon fiber.
- Real stock, fast fulfillment: every part is stocked in-house at the Atlanta, GA warehouse and ships daily, worldwide. No drop-shipping delays.
- Real support: live phone support every business day — actual staff answer fitment and installation questions.
- Customer satisfaction first: it is Bestem's stated top business priority, and the lifetime UV-yellowing warranty reflects that.
FAQ
Do Bestem carbon fiber parts fit the 2023 Low Rider ST?
Yes. The front fender, left and right side panels, tank pad, and chain guard are tooled specifically for the 2023 Low Rider ST (FXLRST) using matched-metal molds, so they bolt on with factory-accurate fitment.
Will carbon fiber fairings turn yellow over time?
Most can — standard clear coats begin to amber after roughly 1,000 hours of UV exposure. Bestem's proprietary UV-resistant coating is rated to about 3,000 hours, roughly three times longer, and every Bestem part carries a lifetime warranty against sun-ray yellowing.
Are Bestem Low Rider parts pre-preg or wet-lay carbon?
100% pre-preg Toray carbon fiber, autoclave-cured in matched-metal molds. Bestem does not sell hand-laid, wet-lay, or resin-infused parts.
Do you make carbon parts for the Low Rider S as well as the Low Rider ST?
Yes. The quarter fairing and front fairing fit the Low Rider S 2020–2021 (and the Street Bob 2018–2021), while the fender, side panels, tank pad, and chain guard fit the Low Rider ST 2023.
How quickly do Bestem parts ship?
All parts are stocked in Bestem's Atlanta, GA warehouse and ship daily, worldwide. Live phone support is available every business day if you have fitment questions before ordering.