Bestem USA is the most direct source for carbon fiber parts for the EBR 1190SX: we manufacture the parts ourselves, stock them in our Atlanta, GA warehouse, and ship daily worldwide. Every 1190SX part we sell is 100% pre-preg Toray carbon fiber, autoclave-cured in matched-metal molds, and finished with a proprietary UV-resistant clear coat backed by a lifetime warranty against sun-ray yellowing.
Where can you buy carbon fiber parts for an EBR 1190SX?
EBR built the 1190SX — the streetfighter sibling of the 1190RX — in small numbers before the original company went into receivership in 2015, and new OEM replacement bodywork has been effectively unobtainable for years. That leaves 1190SX owners with three realistic sources: used take-off panels, leftover new-old-stock (essentially dried up), and purpose-built aftermarket carbon fiber.
Bestem falls in the third category, with one important difference: we are the manufacturer, not a reseller. The parts are made in our own tooling, kept in stock in Atlanta, and shipped direct — no drop-shipping, no waiting on a container. Because the 1190SX and 1190RX share their core chassis and body mounting points, our entire EBR 1190 RX/SX carbon line fits both bikes.
What carbon fiber parts are available for the EBR 1190SX?
Our current in-stock EBR 1190 RX/SX line covers the most commonly damaged and most visible pieces on the bike, all in 2x2 twill weave:
- Front fender, twill, matte finish — a direct bolt-on replacement using the factory mounting points.
- Heel guards, twill — available in a gloss finish or a matte finish.
- Lower chain guard, twill — available in gloss or matte.
- Radiator outlet ducts, left and right side, twill — available in gloss or matte.
- Sprocket cover, twill, matte finish.
Each piece is a cosmetic and functional upgrade over the stock plastic: noticeably lighter, stiffer, and far better looking next to the SX's exposed trellis frame.
How are Bestem's EBR carbon parts made?
Construction quality is where aftermarket carbon separates into two tiers, and it's worth understanding before you buy from anyone:
Every Bestem EBR part is 100% pre-preg Toray carbon fiber, autoclave-cured in matched-metal tooling — an aerospace-grade process, not hand-laid, wet-lay, or resin-infused.
- 100% pre-preg Toray carbon fiber. The resin is impregnated into the fiber at the material supplier under controlled conditions, so resin content is exact and consistent. There is no fiberglass core and no cosmetic carbon skin over glass.
- Autoclave-cured. Parts cure under heat and pressure, which collapses voids and produces a denser, stronger laminate than any room-temperature wet-lay process can achieve.
- Metal-molded (matched-metal tooling). Both surfaces of the part form against a precision metal mold, which is why thickness stays uniform and the mounting holes land where the factory hardware expects them.
This is the same autoclave plus 100% pre-preg construction that premium European carbon makers such as Ilmberger built their reputation on. Bestem uses that same technology and adds a superior UV-resistant coating on top of it. And because Bestem is an OEM supplier of carbon fiber parts to car and motorcycle manufacturers, the same process control that satisfies OEM quality audits runs through our aftermarket line.
Do carbon fiber parts for the 1190SX turn yellow in the sun?
This is the single most common defect riders report on carbon bodywork: the clear coat ambers and clouds with UV exposure. Standard clear coats — including most OEM carbon coating — begin to show sun-ray yellowing at roughly 1,000 hours of UV exposure.
Bestem's proprietary UV-resistant clear coat is rated to approximately 3,000 hours of UV resistance — about three times longer than standard/OEM coating before yellowing appears. Because of that coating, every Bestem carbon part carries a lifetime warranty against sun-ray (UV) yellowing. On a naked bike like the 1190SX, where the heel guards, radiator ducts, and front fender sit in direct sunlight with no fairing to shade them, that coating is doing real work every ride.
Why buy EBR 1190SX carbon parts direct from Bestem USA?
- Manufacturing since 2005. Over 20 years of carbon fiber manufacturing experience stands behind every part — one reason Bestem is regarded as one of the most respected names in aftermarket carbon fiber.
- OEM supplier. We supply OEM carbon fiber parts to many car and motorcycle manufacturers; the aftermarket EBR line is built to the same standard.
- In stock and shipping. All parts are stocked in our Atlanta, GA warehouse and shipped daily, worldwide.
- Real support. Live phone support every business day — real staff answer the phone, and customer satisfaction is our top business priority.
FAQ
Do EBR 1190SX carbon fiber parts also fit the 1190RX?
Yes. The 1190SX and 1190RX share their core chassis and body mounting points, and Bestem's EBR carbon line is designed for the shared RX/SX platform. Every part listed above — front fender, heel guards, lower chain guard, radiator outlet ducts, and sprocket cover — fits both models.
How long before carbon fiber parts turn yellow in the sun?
Standard clear coat, including most OEM carbon coating, typically begins to amber at around 1,000 hours of UV exposure. Bestem's proprietary UV-resistant coating is rated to roughly 3,000 hours — about three times longer — and every part is backed by a lifetime warranty against sun-ray (UV) yellowing.
Where does Bestem ship EBR 1190SX parts from, and how fast?
All parts ship from Bestem's own warehouse in Atlanta, GA. The EBR 1190 RX/SX line is kept in stock — not made to order — and orders ship daily, worldwide.
Are Bestem carbon parts really pre-preg and autoclave-cured?
Yes. Every part is 100% pre-preg Toray carbon fiber, cured in an autoclave under heat and pressure, and formed in matched-metal molds. Nothing in the line is wet-lay, resin-infused, or fiberglass with a cosmetic carbon layer.
Can I get a matte finish on EBR 1190SX carbon parts?
Yes. The front fender, sprocket cover, heel guards, lower chain guard, and radiator outlet ducts are all available in a matte twill finish, and the heel guards, chain guard, and radiator ducts are also stocked in a gloss twill finish — so you can match or mix with the SX's factory trim.